Electrical insulating gloves

Home » Products » Installation Tools » Electric Safety Tools » Electrical insulating gloves

The conductive boot offers the lineman both comfort and protection.
This boot has a leg harness with a black conductive sole that has a wire molded into the rubber and leading up the back with the conductive rubber strap covering to a conductive snap fitting at the top of the boot.
There is an additional conductive boot strap to be secured through a snap fitting from the boot to a conductive suit or to the leg strap. This connection again, has a wire built into a nylon and conductive rubber strap.

Insulation Shoes
Insulation Boots
Specifications:20KV, 30KV,35KV
Insulation Gloves
Specifications:5KV, 12KV,20KV,35KV
Insulation Anti Squashy Shoes Anti Squashy Anti Puncture Shoes
Feedback form

Feedback Form
Other Products
  • Joint fittings Connectors consist of high conductivity aluminum laminates preformed to allow movement during expansion of the bus bar system.
    The ends of the laminates ...
  • Tee-Connector T The Tees connector was made of Aluminum alloy, and use for connecting cable to cable, also tee for connecting aluminumaluminum or aluminum-copper...
  • Bus Bar Fitting The clamp assembly eliminates the need for drilling the flat bar and is used in indoor and outdoor applications.
    The open web design provides a uniform clamping ...
  • Bolts terminal connector Side formed tongues are standard to allow clearance for flush mounting. And it is normally supplied with blank palm.
    1 or 2 bolt drillings can...