Operating Tool

Operating sticks are made from high-quality foam-filled fiberglass rods. They are used for high-voltage operations, for use with HV testers for testing and proving dead, or applying portable earthing equipment.
Operating sticks are available in three standard lengths and two colors, high visibility orange and yellow.
They are extendable using a non-conductive fiberglass button splice.

Pulling gateway pole


Range of application: For the pulling gateway operation of high voltage isolated switch.

Pulling gateway pole(Connected model big type)


Range of application: For the pulling gateway operation of high voltage isolated switch
Feedback form

Features:
Electrically and mechanically type- tested to Proof-tested during manufacture to 100kV per 300mm Standard diameter 32mm OD; 39mm OD available on request Standard lengths 1.2m, 1.8m, 2.4m High-visibility orange or yellow coloured fibreglass cloth - not painted Filled with dense foam for good electrical performance Textured surface for good grip under all conditions May be supplied smooth for live line tools Wide range of accessories and adaptors available Standard operating kits available Customised kits on request

Pulling gateway pole


Range of application: For the pulling gateway operation of high voltage isolated switch.

Pulling gateway pole(Connected model international standard)

Range of application: For the pulling gateway operation of high voltage isolated switch.

Feedback Form
Other Products
  • Pole Fuse Switch Disconnector Parallel groove clamps are mainly used for transmitting current between the interconnected conductors, for example tapping off bus-bars to equipment on substations...
  • Damper / Spacer The diesel engine is an important part of the generating set, water pump, cultivator and other machines, which are powered by diesel engine. Our company provides...
  • Line Hardware Fittings This steel is especially suitable for forging and its good performance, especially ductility, is due to the heat treatment process. The short circuit capability of the Line...
  • Tension Clamp These requirements do not apply to clamps which are used in switching substations.The components which transmit the compr essive force must be designed so that no...