Substation Products

Home » Products » Overhead Line Solution » Substation Products
  • Tee-Connector T The Tees connector was made of Aluminum alloy, and use for connecting cable to cable, also tee for connecting aluminumaluminum or aluminum-copper conductor combinations.
    Clamping bolts have two type, one was U type bolts and with nuts, and the other was hex-stops for one-wrench...
  • Bolts terminal connector Side formed tongues are standard to allow clearance for flush mounting. And it is normally supplied with blank palm.
    1 or 2 bolt drillings can be supplied to customers' specifications. Clamping bolts have hex-stops for one-wrench installation...
  • Joint fittings Connectors consist of high conductivity aluminum laminates preformed to allow movement during expansion of the bus bar system.
    The ends of the laminates are welded to solid aluminum terminals...
  • Bus Bar Fitting The clamp assembly eliminates the need for drilling the flat bar and is used in indoor and outdoor applications.
    The open web design provides a uniform clamping pressure while minimizing the weight of the connector.
    Web design cast aluminum alloy body...
Feedback Form
Other Products
  • Bolts terminal connector Side formed tongues are standard to allow clearance for flush mounting. And it is normally supplied with blank palm.
    1 or 2 bolt drillings can be ...
  • Pole Fuse Switch Disconnector Parallel groove clamps are mainly used for transmitting current between the interconnected conductors, for example tapping off bus-bars to equipment on substations...
  • Line Hardware Fittings This steel is especially suitable for forging and its good performance, especially ductility, is due to the heat treatment process. The short circuit capability of the Line...
  • Tension Clamp These requirements do not apply to clamps which are used in switching substations.The components which transmit the compr essive force must be designed so that no...